HIKARI AIR

Main Features:

-PREVENTS SCRATCHES WITH A HIGH HARDNESS 9H COATING.

-OUTSTANDING WATER- AND OIL-REPELLENY.

-PREVENTS OIL BUILDUP.

-PREVENTS PAINT AND PARTS FROM OXIDIZING.

-EASY APPLICATION FOR PROFESSIONAL-GRADE RESULTS.

-IT EVERY FEW YEARS.

PRODUCT TYPE : PROTECTIVE AIRPLANE COATING AGENT
USE: PLANE POLISH/PAINT PROTECTION SEALANT
Composition:  Modified siloxane
Product Name: HIKARI AIR
Product Code: HS-A200ml / HS-A1L

For best results please follow these steps. *(Precautions)

*Do not use for other than the intended purpose.
*Do not use on anything except the body of the car. This includes tyres, resinous bumpers, rubber, leather etc.
*Do not use in extremely hot weather when the body of the vehicle is hot, as this can lead to marks and discoloration that cannot be wiped away.
*Use in a shaded area when the body of the vehicle is cool.
*Do not use in areas with strong winds or where there is sand or dust, as this can cause damage.
*Product can stain clothing. If some of the product gets on your clothing, please wash immediately.
*Do not pour the product directly onto the body of the vehicle or leave the car when the product is still applied.
*Use in a well ventilated area.
*Avoid strong or direct sunlight during application.
*Avoid working in dusty and windy areas.

How to use:

1) Remove sand, salt, wax, glue, dirt, dust, etc., using a detergent with high oil-decomposing power or silicon remover.
Wipe off all dirt and water completely, wait until the surface dries completely.

*If impurities remain on the surface, the coating film will not adhere to the surface.

(2) Apply an appropriate amount of the coating (about 5 to 6 drops at one time), move the sponge horizontally and vertically, and wipe and gently polish one area (about 50 x 50 cm square) with a cloth specially designed for the application.

*Apply coating liquid area by area (including rubber and plastic parts).

(3) After painting the entire surface, let it dry naturally for 4 hours (in summer time) to 8 hours (in winter time) to complete the process.
When wiping up, do not rub hard to polish, but wipe up as if you were wiping up. Please do not rub hard to polish.

The surface will dry and become touchable in about 24 hours (30 hours in winter time) after application, but the film will not be fully hardened until about 50 hours (60 hours in winter), so do not spray water or do not rub hard during this time.

We recommend that you apply the coating to a surfboard side by side (when you apply coating to both sides, please apply coating to one side first, wait until coating film harden completely, and only after that apply coating to the second side).

If the coated surface is left to dry while surfboard is touching a surfboard stand or similar surface, the coating will not dry. If the coated surface is left to dry while touching a board stand or the like, it may leave marks on the part that touched the board stand or the like.

When applying multiple layers coating, please keep at least 50 hours (60 hours in winter time) interval between each coating. The film will be thicker if you increase the number of applications rather than increasing the amount of liquid used at one time.

After use in the ocean, rinse off sand and seawater with clean water and wipe off water drops with a microfiber cloth before storing your surfboard in the surfboard bag or cover.

Set Contents: Kit
– HIKARI AIR liquid coating 100ml*2
– Sponge x 4
– Edgeless microfiber cloth x 4
– Application instructions

Set Contents: 1L
– HIKARI AIR liquid coating 1L
– Application instructions